Stumbled across these two … abortions on the web:
That’s a S&W .500 Magnum snubbie with a “tribal” paint job.
Just, why?
Then there’s this:
All ’bout the Benjamins!
Please pardon me while I hurl….
The Smallest Minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities. – Ayn Rand
Stumbled across these two … abortions on the web:
That’s a S&W .500 Magnum snubbie with a “tribal” paint job.
Just, why?
Then there’s this:
All ’bout the Benjamins!
Please pardon me while I hurl….
…pop over to Rummel’s place and read his old essay Confessions of a Deathbeast. It disappeared for a while, but I asked him about it, and he reposted.
Got my taxes done over the weekend. No repeat of last year’s bloodbath, this year the non-interestbearing payroll savings plan paid off, so I dropped a little of it on a new gun – a Mossberg 930 JM Pro Series. Looks a lot like this:
The specs are:
Gauge 12 Chamber Size 3″ Capacity 10 Barrel 24″ Vent Rib Sights Fiber Optic Front Chokes Accu-Set Overall Length 44.5″ Length Of Pull 14″ Barrel Finish Matte Blue
So what accessories should I get for it?
EDITED TO ADD:
Comments have been left noting the rather long 14″ length of pull. In looking at pistol-grip stocks, I see that Choate notes: “The 930/935 shotguns can not be shortened shorter than 13 3/4 inches because of the recoil spring tube that protrudes form the back of the receiver.”
I don’t think I’d use this as a home-defense shotgun. The barrel is too long. For that, I’d stick with my 590. Its barrel is 4″ shorter. Doesn’t sound like much, but it is.
Recall page is here. If you were somehow lucky enough to find .22 ammo, I hope it wasn’t this stuff:
Olin Corporation, through its Winchester Division, is recalling two (2) lots of M*22™ 22 Long Rifle 40 Grain Black Copper Plated Round Nose rimfire ammunition.
Symbol Number: S22LRTLot Numbers: GD42L and GD52LWinchester has determined the above lots of 22 Long Rifle rimfire ammunition may contain double powder charges. Ammunition with double powder charges may subject the shooter or bystanders to a risk of serious personal injury and/or death, or cause firearm damage, rendering the firearm inoperable.
That would leave a mark that would not buff out.
I just wish I could find some Unique…
Seen in traffic tonight (sorry about the image quality – cellphone cam):
AR-Kitty! And AR-Kitty Jr!
Check THIS out!
…four slugs from a .44. No Les no more.”
(From a headstone at Boot Hill in Tombstone AZ.)
Until this time I have resisted purchasing anything chambered in any of the various .44 calibers. I have .22’s, .223’s, 6.5mm, 7mm, .30, 8mm, 9mm, .40 and .45, but nothing in .44.
That just changed. Or, well, it will on 11/22 when I can pick it up.
I dropped by to visit my favorite Merchant O’Death this morning just to see what they had on the shelves (the AR-15 drought is most definitely over, and ammo is beginning to turn up again – even some .22, though it’s limited to 100 rounds per customer). “So, what’s on your ‘must have’ list these days?” he asked. I responded “Nothing, really. I’ve got all the ‘must haves’ and now I’m down to the ‘kinda wants.'”
“So what do you kinda want?”
“Well, I’ll eventually get something chambered in .44.”
We discussed the various Specials and Magnums (of which he had a pretty good selection of the latter in the case), then he said, “I’ve got something interesting!” and headed over to the display case where they keep the special stuff.
This is never a good thing to hear when it comes to my wallet.
What did he have? This:
That’s a pre-2000 629-5. According to the Smith & Wesson forum it is:
a Lew Horton Model 629 S&W Hunter Competitor, 200 were made, only 90 in the US.
The cylinder is unfluted with a brushed finish, the frame and 6″ Mag-Na-Ported and weighted barrel slab sides are polished, barrel and frame top are bead-blasted, smooth trigger, no lock, floating firing pin. The serial number supports the “200 were made” claim.
It’s freaking beautiful. I almost hurt myself whipping out the plastic. Can’t pick it up until the 22nd because it’s used and the shop has to hold it while the Tucson Police ensure it’s not stolen property.
I think I stole it.
UPDATE: Smith & Wesson customer service says it shipped to Lew Horton in 2000, but that’s all they have on it.
UPDATE II: Lew Horton says they’re sending me a letter about my gun.
Final update:
Lew Horton Distributing got back to me:
Thank you for your interest in Lew Horton Distributing. Your Smith & Wesson Performance Center Model 629 (S&W #170049), serial number MHR0XXX, is indeed a Lew Horton Special Edition. This model was unique in the market place at that time. It was fitted with a six inch slab sided barrel that had an integral variable weight system, and featured barrel cut outs. The barrel had an integral Weaver style scope mount, and was Mag-na-Ported. The cylinder was unfluted and the cylinder edges were beveled. It was fitted with the then new style Performance Center thumb latch. The action was hand tuned by the craftsmen in the Performance Center. This gun is one of several different variations of the PC 629 Hunter that we did over the years.
This gun is one of 457 units produced in that configuration. This run Model 629 was manufactured by Smith & Wesson and delivered to Lew Horton Distributing from 1999 to 2001.
This Lew Horton Special Edition is listed in the Bluebook of Gun Values under the “Lew Horton Distributing” section.
Best of luck!
So not one of 200, but one of 457 ain’t bad!
But I like the sentiment!
So, back in 2005 I suspended my search for a Smith & Wesson Model 25-5 Lew Horton special N-frame 5″ barreled .45 Colt and instead purchased a 4″ Model 25-13 Mountain Gun in that caliber. Then, early the following year I bought a Winchester ’94 rifle in the same caliber. Early this year, I traded my ’94 for a smaller, handier Rossi ’92 – again in .45 Colt.
Today I went to see my favorite Merchant O’Death, and he said, “Kevin, you like Smith & Wesson revolvers! Wanna see something interesting?”
It’s not a Lew Horton, but it is a custom Model 25-7, 5″ .45 Colt. No stupid lock, heavy barrel, unfluted cylinder, firing pin on the hammer. Looks like this:
(click for full size)
Now I need to get it to the range to see how it shoots. It weighs about 5 oz. more than the Mountain Gun and a lot of that is in the barrel, so hopefully it’ll be a bit less brisk with the 285 grain cast load I shoot in that caliber.
It belonged to the guy who owns the gun shop I bought it from, so I’m expecting good things.